309.751.4661   Silvis, IL - Map & Hours
Open today until 5:30pm

Land Pride SRT76

Land Pride SRT76 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Land Pride SRT76 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

Features Benefits
6" Offset capability Offset allows operator to till closer to fences, buildings, sidewalks, and other objects.
Hook skid steer hitch to the left side of tiller hitch plate to side shift tiller 6" to the right.
Hook skid steer hitch to the right side of tiller hitch plate to center tiller on the skid steer.
Depth indicator Operator can tell how deep the tiller is working in the soil without leaving the seat.
Hydraulic depth control Operator can rotate skid steer hitch on the tiller skid shoes to any depth indicated on the
depth indicator. Operator does not have to adjust skid shoes to set tiller depth.
Rotor can be operated
forward or reverse
Allows operator to choose forward or reverse tilling by reversing hydraulic flow. Reverse
tilling is good for breaking up hard ground and covering trash.
SRT62 offers a choice
between low flow or high flow
SRT76 is offered in high flow
Low flow (14 to 23 gpm) and high flow (23 to 42 gpm) allow these tillers to fit a wide variety
of skid steers.
Case drain hose Reduces back pressure on motor which increases power for tilling and protects outer seal.
1/4" Heavy duty deck and
3/8" heavy duty end plates
Deck and end plates are built tough.
Replaceable skid shoes Keep bottom of end plates from wearing.
Bolt in spiral design rotor Reduces bouncing of tiller.
Bolt-on tiller tines designed to
attach with one bolt per tine
Makes replacing tines fast and easy.
Bi-directional hardened boron
steel tines
Tiller tines are built tough to last. Tines are sharpened on both edges to cut into the soil
while operating forward or reverse.
If bi-directional tines are used primarily rotating in one direction, they can be reversed
(turned around) to extend their life.
Motor guard Protects motor, fittings, and hydraulic hoses from damage caused by bumping into objects
around the motor.
Adjustable scarifier shanks
constructed of hardened steel
These shanks are built tough to rip up hard soil. They make tilling easier in hard soil.
Optional small flat face
couplers or large flat face
couplers
Fits a wider variety of skid steers.

Specifications

MODEL SRT76
Weight (kg) 880 lbs. (399)
Tilling Width (m) 76" (1.93)
Overall Width (m) 88-1/2" (2.25)
Tilling Depth (cm) 2", 4", & 5.6" (5.1, 10.2, 14.2)
Patented Depth Indicator Depth indicator (Viewable from operator seat)
Hydraulic Requirements Low Flow Motor (Lpm) N/A
High Flow Motor (Lpm) 23-42 gpm (87-159) 16-23* gpm (60.6-87) with minimum 2600 psi (17.9 mPa)
Motor Case Drain Standard
Number of Rotor Flanges 11
Number of Tines per Flange 4
Tine Construction Bi-directional forged hardened "C" shaped
Direction of Travel Bi-directional (forward and reverse)
Side Shift Capabilities (cm) 6" (15.2) to the right
Rotor Swing Diameter (cm) 18.3" (46.5)
Number of Shanks 6