Quad Cities Region, Illinois
TRANSLATE

Double tap to zoom

 

Features

Large main housing Ability to handle large drifts.
Large impeller diameter The ability to move and throw material farther.
Level run indicator (Patent-Pending) Operator can visually verify the Snow Blower is properly leveled before each use. Protects against tilting the auger into concrete/paved surfaces.
Hydraulically operated deflector spout Allows operator to change end of spout up or down from the seat to direct blown snow up close or far away.
Hydraulically operated chute rotation with sprocket drive Allows operator to change direction of snow discharge from the seat. Sprocket drive is built to last.
Bolt-on reversible and replaceable cutting edge Improves service life of Snow Blower by protecting the unit from bottom wear and absorbing some of the shock when hitting solid objects. The blade can be rotated 180o to double its life and can be replaced when both edges are worn out.
Greasable auger end bearing Less drag on the powertrain and extends life of unit.
Sprocket driven chute rotator Allows operator to change chute rotation angle within a 220o discharge pattern.
3/8" Auger Flighting Stands up to sever use.
   
Options  
Quality hydraulic motor available in low, medium, or high volume flow Provides long life, durable construction. Three flow options allow this Snow Blower to fit many skid steer/tractors.
Bolted-on outer skid shoes Supports cutting-edge above paved, gravel, and rocky surfaces. They are adjustable and replaceable.
Inner skid shoes secured with a bent pin. Supports cutting-edge above paved, gravel, and rocky surfaces. Bent pin makes it easy to change skid shoe height and replace.

Specifications

Model No Model SBL2566
Working Width 66"
Overall Width 71 1/2"
Weight with outside skid shoes, case drain line, couplings, & hydraulic motor 816 lbs
Drive and Control System Hydraulic motors with electric over hydraulic
   
Hydraulic Requirements:  
Low Volume Motor Option 12 - 19 GPM
Medium Volume Motor Option 20 - 26 GPM
High Volume Motor Option 27 - 33 GPM
Hydraulic Pressure Rating 2500 - 3500 psi
Hitch Skid steer/loader mounting plate
Main Housing Material 10 Gauge
Side Plate Material 3/16"
Chute Opening at the Base 10"
Impeller Housing Depth 8"
Impeller Diameter 24"
Number of Impeller Blades 4
Auger Diameter 16"
Number of Auger Paddles 4
Cutting edge Bolt-on, reversible, and replaceable full-length cutting edge
Skid Shoes Bolt-on, adjustable & replaceable
Chute Rotation 220 Degrees (Hydraulically driven sprocket)
Spout Deflector Hydraulic operation
Spout Deflector Cylinder Double acting 2" x 4" x1 1/2" rod
FIND US ON FACEBOOK
Learn More
 
 
WATCH US ON YOUTUBE
Learn More

 

or call us at (309) 751-4661